[manual index][section index]


avr - Atmel AVR support


avr/burn [-e] [-r] [ -d device ] file.srec


Currently there is just one Inferno application to support Atmel AVRs but others should appear.

Burn initialises or verifies the contents of an Atmel ATmega128 AVR. The programming board must be connected to a serial port (see eia(3)), /dev/eia0 by default. File.srec is a file containing the desired flash contents in Motorola S-record format, as produced by ms2(10.1). By default, burn erases the AVR chip (both flash and EEPROM), then loads the flash with the contents of file.srec. The -e option stops burn from erasing first, allowing additional code or data to be loaded (but only into an already-erased region). If the -r option is given, burn instead compares the contents of the AVR with the data in file.srec. Burn supports the MIB510 programming board from Crossbow Technology Inc.




eia(3), ms2(10.1)

AVR(1 ) Rev:  Thu Feb 15 14:42:47 GMT 2007